Trust 850F User Manual

TRUST 850F VIBRAFORCE FEEDBACK SIGHTFIGHTER

Instructions when using for the first time

1. Uninstalling Old Drivers And Devices
2. Installing the driver in Windows
3. Installing DirectX 8.1 in Windows
4. Connecting the gamepad
5. Use
1

Introduction

This instruction manual is for users of the TRUST 850F VIBRAFORCE FEEDBACK
SIGHTFIGHTER. The TRUST 850F VIBRAFORCE FEEDBACK SIGHTFIGHTER
can be used to play games. The built-in Vibration Feedback function gives the
gamepad increased realism and better control over the games.
2

Safety

Carefully read the following instructions before use:
The TRUST 850F VIBRAFORCE FEEDBACK SIGHTFIGHTER does not
-
require any special maintenance. Use a slightly damp, soft cloth to clean the
gamepad.
Do not use aggressive substances, such as petrol or white spirit, to clean the
-
device. These may harm the material.
Do not submerge the device in liquid. This may be dangerous and will
-
damage the device. Do not use this device near water.
Make sure nothing is placed on the cable. Do not use this device in an area
-
where the cable can become worn or damaged as a result of people walking
over it.
Do not repair this device yourself. If you open this device, you may touch live
-
components.
Under the following circumstances, have the device repaired by qualified
-
personnel:
- The cable or plug is damaged or worn.
- The device has come into contact with rain, water or another liquid.
2.1 Vibration Feedback
Note: Playing games using the Vibration Feedback function for long
periods of time may eventually lead to physical injury. It is
strongly recommended to take a break after playing for no
longer than one hour or to temporarily turn off the Vibration
Feedback function. The Vibration Feedback function can be
turned off in the 'Game Controller' settings in the Windows
Control Panel. See chapter 4.2 for more information concerning
turning off the vibration.
Chapter
(3.1)
! U K
(3.2)
(3.3)
(3.4)
(4)
1