Ambilight - Philips 50PFL7956 Manual

To set the Ambilight colour, select Ambilight colour and press
OK. Select Dynamic, if Ambilight should respond to onscreen
images or select one of the fixed colours. Select Custom if you
To set an Ambilight colour of your own, select Custom in the
Ambilight Colour menu. With Custom selected, you can open
the Custom colour menu. Select Palette to choose your own
colour. Ambilight Custom colour is a fixed (non-dynamic) colour
To set the difference in colour level between the lights on each
side of the TV, select Separation. Separation Off gives a dynamic
To set Ambilight to fade out and switch off a few seconds after
you have switched off the TV, select TV switch off. Allow
Ambilight to fade out and switch off completely before you
Read more about Lounge light mood in Help > Setup >
To always switch off Ambilight when Scenea is switched on,
.select Scenea lounge light and select Off
The colour of the wall behind your TV can influence the colour
effect of Ambilight. To correct this influence, select Wall colour
and select a colour that matches the wall colour. Ambilight will
correct its colours to mix best with the colour of the wall behind
When the TV is on standby, you can switch Ambilight on and
.create a Lounge light effect in your room
To switch Ambilight on while the TV is on standby, press
To change the Lounge light colour scheme, press Ambilight on
To switch off Lounge light, press and hold Ambilight on the TV
39
Ambilight colour
.want to set a specific fixed colour
Custom colour
Separation
.but uniform Ambilight colour
TV switch off
.switch the TV back on again
Lounge light mood
.Ambilight > Lounge light mood
Scenea lounge light
Wall colour
.the TV
Lounge light
.Ambilight on the TV
.the TV again
.for 3 seconds
Dim the lighting conditions in the room and position the TV •
Adjust Ambilight according to the colour of your wall at home •
To prevent poor infrared remote control reception, position •
.setting
In the Adjust menu, select Ambilight and press OK. Switch
.Ambilight On or Off. You can also press Ambilight on the TV
In the Adjust menu, select Ambilight dynamic and press OK.
Adjust the speed at which Ambilight responds to onscreen
Read more about other Ambilight settings in Help > Setup >
More Ambilight settings are available in the Ambilight settings
menu in Setup. To change these settings, press h and select
To set the Ambilight brightness, select Ambilight brightness and

Ambilight

: For the best Ambilight effect
.up to 25 cm away from the wall
.in the Wall colour setting
.your devices out of sight of Ambilight
.To open the Adjust menu, press t ADJUST
.To close, press t again
Switch Ambilight on or off
.Ambilight > Settings
.Setup > TV settings > Ambilight
Ambilight brightness
.press OK. Adjust the light output of Ambilight
4.2
Placement
Adjust
Ambilight dynamic
.images
Settings
Setup / Ambilight