Philips 50PFL7956 Manual page 23

If you or your family has a history of epilepsy or photosensitive •
seizures, consult a medical professional before exposing yourself
.to flashing light sources, rapid image sequences or 3D viewing
To avoid discomfort such as dizziness, headache or •
disorientation, we recommend not watching 3D for extended
If you experience any discomfort, stop watching 3D and do not
immediately engage in any potentially hazardous activity (for
example driving a car) until your symptoms have disappeared. If
symptoms persist, do not resume watching 3D without consulting
Parents should monitor their children during 3D viewing and •
ensure they do not experience any discomfort as mentioned
above. Watching 3D is not recommended for children under 6
.years of age as their visual system is not fully developed yet
Do not use the 3D glasses for any purpose other than •
CHOKING HAZARD - Do not let children under 6 years of •
age play with the 3D glasses, they could choke on the battery lid
Do not expose the 3D glasses to direct sunlight, heat, fire or •
.water. This may result in a product malfunction or fire
Use a clean soft cloth (microfibre or cotton flannel) to clean •
the lenses to avoid scratching them. Never spray cleaner directly
.onto the 3D glasses. This may damage the electronics
Do not drop, bend or apply force to the lenses of the 3D •
Do not use cleaning chemicals containing alcohol, solvent, •
surfactant, or wax, benzene, thinner, mosquito repellent or
.lubricant. Using these chemicals can cause discoloration or cracks
23
Health warning
.periods of time
.a medical professional first
.watching 3D TV
.(or battery (if present
Cleaning and care
.glasses
To watch 3D on this TV, simply put on the 3D glasses. Two
.pairs of passive 3D glasses are included
For an extra pair of glasses order the Philips Passive 3D glasses
PTA426 or PTA416. The 3D performance of other 3D glasses is
To start watching a 3D movie or programme, insert a 3D movie
into a 3D Blu-ray Disc player or tune to a TV channel that
Press h (Home) and select the 3D Blu-ray Disc player or
.select Watch TV and tune to the TV channel
The TV can detect when 3D is available. When the 3D message
.appears, select Start 3D and press OK. Put on the 3D glasses
If the TV cannot detect the 3D signal (the 3D signal tag is
missing), the 3D programme is shown as a double image on
To switch the double image to 3D, press t ADJUST, select 3D
and select Side by side or Top / bottom according to the double
You might need to select the inverted format if the normal
To stop watching 3D, press t ADJUST and select 2D in the
You can also stop 3D when you switch to another channel or
.You can convert any 2D programme to watch it in 3D
To convert a 2D programme to 3D, press t ADJUST, select
To stop the 2D to 3D conversion, select 2D in the 3D menu or
switch to another activity in the Home menu. The conversion will
.not stop if you switch between TV channels
You can change the depth of 3D for a weaker or stronger 3D
To set the 3D depth, press t ADJUST and select 3D depth.
.Use the slider bar to set the 3D depth and press OK
If a 3D TV broadcast is switched to 2D, the TV shows only •
:For an optimal 3D viewing experience, we recommend that you
sit at least 3 times the height of the TV screen away from the •
.TV, but no further than 6 metres away
avoid fluorescent lighting (such as TL lighting or certain energy •
saving light bulbs which operate on a low frequency) and direct
.sunlight as they may interfere with the 3D experience
3D
What you need
.not guaranteed
Watch 3D
.broadcasts programmes in 3D
.image positions
.format results in strange 3D effects
.3D menu
.connected device
2D to 3D conversion
.3D and select 2D to 3D conversion
.the 3D-left picture
3D is not available in Multi view •
Optimal 3D viewing
Basics / 3D
2.4
Start 3D
.screen
Stop 3D
3D depth
.effect
Specifics