Table of Contents
Advertisement
The TV switches itself off (for 10 seconds) and then back on
.The TV software has been updated. You can use the TV again
To prevent an accidental update of the TV software, delete the
.autorun.upg file from the USB memory device
47
. . . Do not
press O twice •
use the O switch on the TV •
.again. Please wait
To view the current TV software version, press h > Setup >
Software settings and press OK. Select Current software info
If the TV is connected to the Internet, you may receive a
message from Philips to update the TV software. You need a
.high-speed (broadband) Internet connection
If you receive this message, we recommend you carry out the
.update. Select Update. Follow the instructions on screen
You can also look for new updates yourself. To look for an
update, press h > Setup > Update software and press OK.
When the update is complete, the TV switches off and back on
again automatically. Wait for the TV to switch itself back on. Do
.not use the Power switch O on the TV
It might be necessary to update the TV software. You need a PC
with an high-speed Internet connection and a USB memory
device to upload the software on the TV. Use a USB memory
device with 256MB free space. Make sure that write protection is
To start the software update, press h > Setup > Update
Insert the USB memory into the side of the TV, select Start and
press OK. An identification file is written on the USB memory
Insert the USB memory into your PC. On the USB memory
device, locate the file update.htm and double click it. Click on
Send ID. If new software is available, download the .zip file. After
the download, unzip the file and copy the file autorun.upg onto
.the USB memory device. Do not place this file in a folder
Insert the USB memory into the TV again. The update starts
automatically. The TV switches itself off for 10 seconds and then
remove the USB memory device from the TV •
If a power cut occurs during the update, never remove the USB
memory device from the TV. When the power returns, the
At the end of the update, the message Operation succesful
appears on screen. Remove the USB memory device and press
Software
Current version
:and read Version
Update from Internet
.Follow the instructions on screen
Update with USB
.switched off
Start 1
Identify 2
Download 3
Update TV 4
Start the update on TV 1
.software. Select USB
Identify the TV 2
.device
Download the TV software 3
Update the TV software 4
.back on again. Please wait
. . . Do not
use the remote control •
.update will continue
.O on the remote control
Setup / Software
4.7
Advertisement
Table of Contents
