BENETEAU FIRST 35 Owner's Manual page 55

RE F Standing rigging
1 Lower shroud
2 Upper shroud
3 Switch
4 Forestay
5 Backstay
N OTE : Dash is the diameter measurement for the rod rigging.
S
TANDING RIGGING
Your BE NE TE AU dealer was responsible for stepping the mast of your boat.
After masting your vessel and after having sailed for the first time it is necessary to seek the help of a qualified specialist in order
to carry out a rigging check.
M
AINTE NANCE
Before each trip, carefully inspect the mast from top to bottom.
Periodically check the rigging tightening and the lock nut or pin locking (you should check it for the first time after a few days
sailing in all types of weather).
Rigging and Sails
Quantity Diameter / Length (mm)
2
2
2
1
1
Patara adjustable
51
6
Dash 10 / 5190
Dash 10 / 13990
Dash 8 / 9890
Dash 12 / 14440
5/16 (PBO) / 14400
D
ANGE R
-To hoist a crew member up to the top of the
mast, make a bowline with the halyard directly
on the bosun's chair ring
-(never use the halyard snap shackle or shackle).
-Do not hoist a crew member when sailing in
heavy weather.
P -
IE CE OF ADVICE
R
E COMME NDATION
-Your dealer BE NE TE AU can carry out all
maintenance operations or recommend a
skilled specialist to do so.