How To Select And Play A Songlist - Viscount unico series User Manual

Radio Remote Control
To start playing the selected piece, press the [PLAY] button. Press it again to pause the song;
a third pressure will resume the song.
To stop playing press [STOP].
New MIDI files can be loaded whether in play, pause or stop condition.

HOW TO SELECT AND PLAY A SONGLIST

Press the [LIST] button to select a song list (.LST file). A "LIST" message will appear on the
top left of the screen.
Dial now the index (the first three digits of the .LST file) of the desired song list with the
digit buttons.
N.B.
- Song lists cannot be selected while a MIDI track is playing. Press the [STOP]
button first and then select the song list.
- If the index is incorrect, or the desired song list is not in the current memory unit,
the display shows the following message:
Wait for a few seconds, while the system loads the .LST file. The name of the song list is
shown on the lower line of the display.
Now Press [PLAY] to confirm the selected song list and load the first MIDI track of the list
on the sequencer. The name of the .MID file will be shown on the display.
LIST ú-26 óg5
LIST ú-26 óg5
îî£ListNOPresent
LIST ú-26 óg5
îî£_List2
25
Viscount
ý
ý
ý
UNICO