Table of Contents
Advertisement
Viscount
UNICO
To start playing the selected piece, press the [PLAY] button. Press it again to pause the song;
a third pressure will resume the song.
To stop playing press [STOP].
At the end of the track, the system will load the next piece in the song list. However, the
sequencer may play it automatically or wait for the user to press the [PLAY] button, according
to the Play Options (see par. "the [REPEAT] button"). The [SONG PREV] and [SONG
NEXT] buttons will select the previous or next track on the song list.
Use the digit buttons to select another song list.
To select single MIDI track press the [LIST] button again.
This button has different effects, depending on which mode is currently in use, either the
MIDI track or songlist.
With MIDI tracks:
Press once to activate the repeat mode, twice to deactivate it. When the repeat mode is on,
the × symbol will show on the display, and when the song is over, it will be played again.
With song lists:
Press the [REPEAT] button once to automatically play the next song of the list when the
previous one is over (Autoplay function). In this case, the symbol will appear on the remote
display.
Press the button again to activate the List Loop function, which plays the whole song list
again once it is over. When this function is active, the × symbol will appear on the bottom
right of the display.
Press the button a third time to activate both the Autoplay and List Loop functions; the
symbol will appear on the display.
Pressing the button a fourth time will deactivate both functions.
L
îî£
ú-26 óg5
îî _MENUET
î
THE REPEAT BUTTON
26
Radio Remote Control
ý
Ş
ş
Advertisement
Table of Contents
