Table of Contents
Advertisement
Viscount
UNICO
HOW TO INSTALL THE REMOTE RECEIVER
1.
Unscrew the screws of the back panel.
On Unico 500 first remove the upper lid
shown in the picture, holding it as
indicated by the arrows. Carefully lift the
lid by holding it on both sides.
Remove the screws in the picture while
holding the panel. Do NOT remove
the screws marked with an X in the
picture.
2.
Grab the panel from the top and pull it slightly until it is
completely free from the Velcro tape.
INSIDE THE ORGAN
30
Radio Remote Control
Advertisement
Table of Contents
