Glossary - Motorola PM1200 Installation Manual

Glossary

Term
A/D
ADC
ADDAG
analog
analog-to-digital
conversion
analog-to-digital
converter
band
baseband interface
port
CODEC
coder/decoder
CPS
Customer
Programming
Software
D/A
DAC
default
digital
digital-to-analog
conversion
digital-to-analog
converter
See analog-to-digital conversion.
See analog-to-digital converter.
See Analog-to-Digital, Digital-to-Analog and Glue.
Refers to a continuously variable signal or a circuit or device designed
to handle such signals. See also digital.
Conversion of an instantaneous dc voltage level to a corresponding
digital value. See also digital-to-analog conversion.
A device that converts analog signals into digital data. See also digital-
to-analog converter.
Frequencies allowed for a specific purpose.
Synchronous serial interface to the transceiver board used to transfer
transmit and receive audio data.
See coder/decoder.
A device that encodes or decodes a signal.
See Customer Programming Software.
Software with a graphical user interface containing the feature set of an
radio.
See digital-to-analog conversion.
See digital-to-analog converter.
A pre-defined set of parameters.
Refers to data that is stored or transmitted as a sequence of discrete
symbols from a finite set; most commonly this means binary data
represented using electronic or electromagnetic signals. See also
analog.
Conversion of a digital signal to a voltage that is proportional to the input
value. See also analog-to-digital conversion.
A device that converts digital data into analog signals. See also analog-
to-digital converter.
Definition
Glossary