Download Print this page

Advertisement

Quick Links

Nighstand
Table de Nuit
Mesa de Noche
Consumer Care:
www.DeltaChildren.com
Delta Children's Products
114 West 26th Street
New York, NY 10001
Tele.212-645-9033
This product is not intended for institutional or commercial use.
Ce produit ne pas destine a un usage institutionnel ou commercial.
Este producto no esta hecho para uso institucional o comercial.
When contacting Delta Consumer Care please reference the above information. Before contacting Delta Consumer Care
please ensure that the information above matches the information found on the label on the Back Panel, please reference the
information found on the product when contacting Delta Consumer Care.
Lorsque vous contactez le Service client de Delta, veuillez faire référence aux informations ci-dessus. Avant de contacter le
Service client de Delta, veuillez vous assurer que les informations ci-dessus correspondent aux informations indiquées sur
l'étiquette qui se trouve sur le panneau arrière; veuillez faire référence aux informations indiquées sur le produit lorsque vous
contactez le Service client de Delta.
Al contactar al servicio al cliente de Delta, entregue la información anteriormente mencionada. Antes de contactar al servicio
de atención al cliente de Delta, asegúrese de que la información anteriormente mencionada calza con la que aparece en la
etiqueta en el panel trasero; al contactar al centro de atención al cliente de Delta, mencione la información que aparece en el
producto.
To register your product for important safety alerts and updates to your product please visit www.DeltaChildren.com and click
on Product Registration.
Pour enregistrer votre produit afin de recevoir des alertes de sécurité et des mises à jour importantes relatives à votre
produit, veuillez visiter le site www.DeltaChildren.com, puis cliquer sur Enregistrement de produits.
Para registrar su producto a fin de recibir importantes alertas y actualizaciones de seguridad, visite www.DeltaChildren.com y
haga clic en Registro de Productos (Product Registration).
April 16, 2015-530020-25722-R0
Read all instructions before assembly and use.
KEEP INSTRUCTIONS FOR FUTURE USE.
ADULT ASSEMBLY REQUIRED
Due to the presence of small parts during assembly, keep out of
reach of children until assembly is complete.
Lisez toutes les instructions avant l'assemblage et
l'utilisation. CONSERVEZ LES INSTRUCTIONS
POUR UN USAGE ULTERIEUR.
L'ASSEMBLAGE DOIT ETRE FAIT
PAR UN ADULTE
A cause de la presence de petites pieces, pendant l'assemblage gardez
hors de portee des enfants jusqu'a ce que celui-ci soit termine.
Lea todas las instrucciones antes de ensamblar
y usar. MANTENGA LAS INSTRUCCIONES
PARA SU USO FUTURO.
DEBE SER ENSAMBLADO POR
UN ADULTO
Debido a la presencia de piezas pequeñas durante el ensamblaje,
mantenga fuera del alcance de los niños hasta que complete el
ensamblaje.
Need Help?
Please visit www.DeltaChildren.com/assembly-videos to
watch our easy and effective assembly videos
Besoin d'aide?
Veuillez visiter www.DeltaChildren.com/assembly-videos
pour regarder nos vidéos faciles et efficaces concernant
l'assemblage
Necesita ayuda?
Por favor, visite www.DeltaChildren.com/assembly-videos
para que vea nuestros videos que muestran como ensamblar
de una manera efectiva y fácil.
Style #:
Lot:
Date:
___________
___________
___________
©2015 DELTA ENTERPRISE CORP.
A
REV

Advertisement

loading
Need help?

Need help?

Do you have a question about the Delta Nighstand and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Delta Childrens Products Delta Nighstand

  • Page 1 Read all instructions before assembly and use. KEEP INSTRUCTIONS FOR FUTURE USE. ADULT ASSEMBLY REQUIRED Due to the presence of small parts during assembly, keep out of reach of children until assembly is complete. Lisez toutes les instructions avant l’assemblage et l’utilisation.
  • Page 2 WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over: . Place heaviest items in the lowest drawers. . Unless specifically designed to accommodate, do not set TV’s or other heavy objects on the top of this product.
  • Page 3: Notes On Assembly

    NOTES ON ASSEMBLY: -During the assembly process whenever using screws or bolts, check each by placing the screw/bolt on the diagram of the item which is drawn actual size and design. Be sure to use the proper size and shape specified in the instructions.
  • Page 4 Hardware System - Review Before Assembly Quincaillerie – Lire Avant D’effectuer Le Montage Revise Antes De Armar- Elementos De Fijacion Y Ensamble AA. M6x50mm Bolt Boulon M6x50mm Perno M6x50mm EE. Crescent Washer Rondelle en Croissant Arandela de Media Luna 1. Insert the Dowels in the Rail into the holes in the Post.
  • Page 5 Install (1) bolt and (1) crescent washer at a time. Tighten until it looks like the picture. Installez (1) boulon et (1) rondelle en croissant à la fois. Serrez jusqu'à ce que cela ressemble à l'image. Instale (1) perno y (1) Arandela de media luna al mismo tiempo. Apriételos hasta que quede como en la ilustración.
  • Page 6 Parts: MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT. Pièces: ASSUREZ-VOUS QUE TOUTES LES PIÈCES PRÉLASSÂMES SONT BIEN AJUSTÉES. Piezas: ASEGÚRESE DE QUE TODAS LAS PIEZAS PRE-ENSAMBLADAS ESTÉN APRETADAS. L. Back Panel x1 D. Top Panel x1 B. Right Side x1 A.
  • Page 7 Parts: Hardware kits part# 25721 Pièces: L'ensemble de quincaillerie - pièce n°25721 El kit de herramientas - Pieza #25721 Piezas: AA. M6x50mm Bolt x8 DD. M6x30mm Bolt x19 Boulon M6x50mm Boulon M6x30mm Perno M6x50mm Perno M6x30mm HH.Φ9x9.5mm Plastic Barrel Nut x5 Écrou à...
  • Page 8 STEP #1 ÉTAPE N°1 The following tools and parts are required: PASO #1 Outils et pièces nécessaires: Se necesitan las siguientes herramientas y piezas: AA. M6x50mm Bolt x2 DD. M6x30mm Bolt x3 Boulon M6x50mm Boulon M6x30mm Perno M6x50mm Perno M6x30mm M4 Allen Wrench Clé...
  • Page 10 The following tools and parts are required: STEP #2 Outils et pièces nécessaires: ÉTAPE N°2 Se necesitan las siguientes herramientas y piezas: PASO #2 AA. M6x50mm Bolt x3 EE. Crescent Washer x3 Boulon M6x50mm Rondelle en Croissant Perno M6x50mm Arandela de Media Luna GG.
  • Page 12 The following tools and parts are required: STEP #3 Outils et pièces nécessaires: ÉTAPE N°3 Se necesitan las siguientes herramientas y piezas: PASO #3 DD. M6x30mm Bolt x3 Boulon M6x30mm Perno M6x30mm M4 Allen Wrench M4 Ballend Screwdriver Clé Allen M4 tournevis M4 à...
  • Page 14 The following tools and parts are required: STEP #4 Outils et pièces nécessaires: ÉTAPE N°4 Se necesitan las siguientes herramientas y piezas: PASO #4 AA. M6x50mm Bolt x3 EE. Crescent Washer x3 Boulon M6x50mm Rondelle en Croissant Perno M6x50mm Arandela de Media Luna GG.
  • Page 16 The following tools and parts are required: STEP #5 Outils et pièces nécessaires: ÉTAPE N°5 Se necesitan las siguientes herramientas y piezas: PASO #5 DD. M6x30mm Bolt x3 Boulon M6x30mm Perno M6x30mm M4 Allen Wrench M4 Ballend Screwdriver Clé Allen M4 tournevis M4 à...
  • Page 18 STEP #6 The following tools and parts are required: Outils et pièces nécessaires: ÉTAPE N°6 Se necesitan las siguientes herramientas y piezas: PASO #6 GG. Φ6x30mm Wood Dowel x2 Cheville en bois Φ6x30mm Pasador de madera Φ6x30mm DD. M6x30mm Bolt x10 Boulon M6x30mm Perno M6x30mm M4 Ballend Screwdriver...
  • Page 20 STEP #7 ÉTAPE N°7 The following tools and parts are required: Outils et pièces nécessaires: PASO #7 Se necesitan las siguientes herramientas y piezas: NN. 16mm Back Panel Screw x10 Vis 16mm pour Panneau Arrière Tornillo 16mm de Panel Trasero Phillips Screwdriver –...
  • Page 21 NN x 10...
  • Page 28 STEP #11 ÉTAPE N°11 PASO #11 Lift lever on left glide up Soulevez le levier à gauche Levantar la palanca a la izquierda se deslizan hacia arriba Press lever on right glide down Glisser sur le levier sur la droite glisser vers le bas Empujar la palanca a la derecha se deslizan por Remove the out piece on each Drawer Guide (Attached to the Left Side, Right Side and Center Panel), (2) total, by pressing the lever to release (see illustration).
  • Page 29 The silver portion of the glide must be pulled to the front of the glide when assembling the drawer into the case. La partie argentée du glissement de doit être tirée vers l'avant de la glisse lors du montage du tiroir dans le boîtier.
  • Page 30 STEP #12 ÉTAPE N°12 MM. 12mm Screw x6 PASO #12 12mm Tornillo 12mm Attach (2) Drawer Guide outer pieces to each assembled drawer. There arepre-drilled holes in each drawer side. i) Place the end of the Drawer Guide with the tab against the Drawer front, then align the holes in the Guide to the holes in the Side, tab should remain very close to the Drawer Front.
  • Page 32 STEP #13 ÉTAPE N°13 PASO #13 Install the drawer in the case body. Carefully align the Drawer Guides on drawer with the Drawer Guides on the case. Push the drawer STRAIGHT in until it "clicks". Check that each side is fully secure.
  • Page 33 STEP #14 ÉTAPE N°14 PASO #14 Install (2) Cup-holders (Part C) to the holes on Top Panel. Installez les (2) porte-gobelets (pièce C) sur les trous situés sur le panneau supérieur. Instale (2) portavasos (Pieza C) a los orificios del panel superior.
  • Page 34: Warranty

    Consumer Care: www.DeltaChildren.com Delta Children’s Products 114 West 26th Street New York, NY 10001 Tele.212-645-9033 Warranty: This Delta product is warranted to be free from defects for a period of 90 days from the date of purchase under normal use. This warranty extends only to the original retail purchaser and is valid only when supplied with proof of purchase, or if received as a gift, when the registration is on file with Delta.