Advertisement
*HWWLQJ 6WDUWHG
4. Remove one side of the
protective liner from the adhesive
➊
pad
.
➋
➌
5. Place the adhesive pad on the
bottom of the mounting base
6. Remove the remaining protective
liner.
7. Ensure the locking lever
mounting base is facing toward
you, and position the mounting
base on the newly cleaned
mounting area.
To ensure an effective bond between
the adhesive pad and mounting
location, wait 24 hours before
attaching a device.
4
$WWDFKLQJ WKH 'HYLFH WR WKH %DVH
Before you use your device on
battery power, you should charge it.
1. Plug the vehicle power cable
➊
➋
.
➌
on the
2. Snap the cradle onto the arm
3. Slide the locking lever
into the mini-USB connector
➌
on the cradle
.
➌
➊
➋
base to the unlocked position.
➎
d zl 560 Owner's Manual
➊
➋
➍
➍
.
➎
on the
Advertisement
