Advertisement
7. Tilt the device
snaps.
➏
8. Plug the other end of the vehicle
power cable into a power outlet in
your vehicle.
,QVWDOOLQJ WKH 'DVK 0RXQW
If you are using an adhesive dash
mount, you should follow these
instructions.
d zl 560 Owner's Manual
➏
back until it
,QVWDOOLQJ WKH %DVH
127,&(
The adhesive pad is permanent and
is very dif¿cult to remove after it is
installed. If you move the adhesive
pad, use rubbing alcohol to help
remove the adhesive residue.
1. Select a mounting location where
the device has an unobstructed
view of the sky.
Ensure the location does not
block the driver's view.
2. Clean the mounting location with
rubbing alcohol.
3. Dry the mounting location using a
clean, dry cloth.
*HWWLQJ 6WDUWHG
3
Advertisement
