Local Monitoring And Remote Monitoring; Installation And Configuration Of Aeg Wifi200; Product Looks And Fitting Position - AEG WIFI200 Installation Manual

4

3.2 Local monitoring and Remote monitoring

There are two modes with which the AEG WiFi200 allows you to monitor your inverter: Local monitoring and
Remote monitoring.
Local Monitoring allows you to monitor your AEG inverter through your home WiFi (WLAN). Local Monitoring
only works within the signal reach of your WLAN.
To set up Local Monitoring you will need to connect the AEG WiFi200 (WiFi Stick), your (home) WLAN router
and the AEG InverterControl app; or, you can establish a direct connection between the AEG WiFi Stick and
the AEG InverterControl app.
Remote Monitoring allows you to monitor your AEG inverter from any place you have a mobile internet
connection, (via the AEG Invertercontrol App) or via PC (via the AEG InverterControl Webportal).
Chapter 4 will explain in detail how the WiFi stick has to be configured in order to work in Local or in Remote
Monitoring mode.

4. Installation and Configuration of AEG WiFi200

4.1 Product looks and fitting position

4
Reset button
RS485 port LED indicator
Figure 1: AEG WiFi200 looks
PD201802 AEG WIFI200 INSTALLATION MANUAL V.1-18 EN