Table of Contents
Advertisement
18
4.3.4
Remote monitoring (#2):
Scan for wireless networks. Connect your PC with the "AEG
1
WiFi" hotspot.
Open the web browser and access the configuration website of
2
AEG WiFi200 with IP address http://192.168.16.254.
Log in with the username "admin" and the password "admin".
This will take you to the configuration interface (see the
3
right column here).
Set the parameters for REMOTE MONITORING
Net Mode: select WIFI(CLIENT)-SERIAL
SSID: click "Scan" and select the Hotspot name of your
router
Encrypt Type: Automatically updated after you select your
4
hotspot (or. Select according to your router, e.g. "WPA2-
AES").
Password: Hotspot password of the wireless router.
IP Type: Leave it as "DHCP".
Network Mode: Leave it as "Client".
Remote Server Domain: 14.215.130.186
Click "Apply" to save the changes. Allow 15 minutes to update
Now you have to possibilities for continuing the setup: either via the AEG InverterControl App, or via the
AEG InverterControl Monitoring Webportal.
PD201802 AEG WIFI200 INSTALLATION MANUAL V.1-18 EN
Configuration via PC+ internet access
18
Advertisement
Table of Contents
