Table of Contents
Advertisement
22
Select the tab "Add monitoring device"and the related
interface will appear. Input the Device name, the Serial
number and the product Key that you will find on the
20
packaging of your AEG WiFi200. Leave the default
connection interval that will appear, then click on "Confirm"
to save and proceed.
If you have more than one Monitoring Device / Collector
21
(WiFi Stick) in your plant, repeat the operation from step
from 19 to 20.
5. Resetting the AEG WiFi200
If malfunctioning occurs during operation of the AEG WiFi200, or if the settings are not properly adjusted, reset
the AEG WiFi200 by pressing and holding the reset button for 5 seconds.
6. Contacts
Solar Solutions GmbH
Schneckenhofstrasse 19
60596 Frankfurt am Main
Germany
Website: www.aeg-industrialsolar.de
AEG Inverter Technical Support:
Mail:
inverter-support@aeg-industrialsolar.de
Tel: +31 172 205 011
PD201802 AEG WIFI200 INSTALLATION MANUAL V.1-18 EN
Reset button:
press and hold
for 5 seconds
22
Advertisement
Table of Contents
