Advertisement
Part 3-Mounting the flat panel screen
Part 3-Mounting the flat panel screen
Hook the top of brackets
(2)
onto the top flange
of wall plate(1). Then swing the screen down.
NOTE:
NOTE:
Always use an assistant or mechanical
lifting equipment to safely lift and position
heavy equipment.
Use the Locking bar(3) to prevent the TV from being removed or
accidentally knocked off of the wall plate. When the locking bar half
insertes into the wall plate , you can use the rotating rod(4) to make it
fully inserted.
UP
-6-
UP
3
5
Part 1a-Wood Stud Mounting
Part 1a-Wood Stud Mounting
Use wall plate(1) as a template, make sure it is level, and mark four
mounting holes along the center lines of the wood studs. Drill four 3/16
1
.
(5mm)dia holes 2 (50mm) deep. Level wall plate(1) and attach to wall
with four long bolts(F and four washers(H . Tighten screws firmly Do not
overtighten
"
)
)
.
Stud finder
Wood stud
"
2 50mm)
(
Φ3/16 (5mm)
"
"
.
H
F
-3-
Advertisement
