Connecting The Handset And Optional Headset - Polycom CX300 User Manual

Connecting the Handset and Optional Headset

Note
• Connect the Polycom CX300 to your computer
If your phone is already assembled and connected to your computer, go
directly to Features of Your Phone
To connect the handset and optional headset:
1. Connect one end of the handset cord to the handset and the other end of
the cord to the handset jack on the back of the phone.
2. (Optional.) Connect the headset cord to the headset jack on the back of
the phone.
A list of supported headsets is available in the Voice section of Polycom's Support
web site at http://www.polycom.com/support/voicedocumentation/.
If headsets are deployed in high electrostatic environments where users frequently
disconnect and re-connect the headset to the phone, it is possible that the phone
can be damaged by electrostatic discharge (ESD).
You should take precautions to avoid excessive electrostatic buildup in your
environment. This can include humidity control and removal of synthetic materials
near the phone location. Antistatic spray applied to carpets in the workplace can
reduce the level of electrostatic buildup.
Getting Started with Your Phone
on page 1-5.
1 - 3