Panasonic CF-37 Series Supplementary Instructions Manual page 5

Windows 2000
Replace "Create BACKUP Disks for Reinstallation" for the following.
Prepare 2HD floppy disks and make sure they are not in the write-protected state, then select
[Start] - [Programs] - [Panasonic] - [Create Backup Disk] and follow the on-screen instructions.
Place a label identifying the contents on each disk.
CAUTION
Be sure to create the Backup Disk if necessary.
If a Backup Disk is not created (in spite of the fact that there is a need to create a Backup
Disk), it will be impossible to return the computer to its original state. In this case, contact
Panasonic Technical Support.
Store the floppy disks in a safe place. They will enable you to return your computer to close to
the condition at the time of purchase should any problems occur.
When creating floppy disks, do not run any other application program.
When creating floppy disks and the message [Insufficient files to copy] is displayed, click
[OK] and then contact Panasonic Technical Support.
While the floppy disk drive indicator is on, do not remove the floppy disk, remove the
floppy disk drive, power down your computer or use the suspend or hibernation function
( "Suspend/Hibernation Functions").
"OPERATING INSTRUCTIONS (page 12)"
5