Phone Settings - Philips 766 User Manual

Hide thumbs Also See for 766:
Table of Contents

Advertisement

screen.
Press [Select] to select a desired colour.
Note:
When the caller's number is not matched in the phonebook, the LED will flash in all
colour.
—Event indicator
You can set LED to be On/Off in case of events (roaming, battery low, etc.).
Press [Select] to select On or Off.

Phone Settings

Answering
You can set the answering mode for the incoming call.
Press [Select] to select the desired one from the following options:
Any key answer: Enables you to answer a call by pressing any key (except for the right
soft key and
Active flip: Enables you to answer a call by opening the flip.
Auto answer: Enables you to answer a call automatically when the headset is plugged in.
Phone Guard
You can restrict incoming calls by automatically barring designated numbers from calling your
phone.
—Answer
If you only would like to answer calls from designated numbers, you can press
choose Answer in the Guard method option, and then press [1] to set the phone
numbers you would like to answer.
Then you can enter the phone number directly or press [Find] to access the Directory and
select a number from it.
Note:
If you don't enter any phone number in the above setting, the phone will reject all
incoming calls.
—Reject
If you only would like to reject calls from designated numbers, you can press
choose Reject in the Guard method option, and then you can press [1] to set the phone
numbers you would like to reject, or press [2] to set the reject method.
Set reject number: You can enter the number directly or press [Find] to access the
Directory and select a number from it.
Set reject method: Press [Select] to select the desired one from the following options:
Reply by SMS: the incomging calling(s) will be rejected while the phone will send a
SMS as a reply to the caller automatically. If you select Reply by SMS, you can
move the cursor the the message selection field and press
message.
Auto hangup: the incoming call will be rejected automatically and without alerts.
Note:
If you haven't set the reject method, the reject function will be invalid.
—None
).
/
to
/
to
/
to select a

Advertisement

Table of Contents
loading

Table of Contents