Philips 766 User Manual page 31

Hide thumbs Also See for 766:
Table of Contents

Advertisement

In the Ring Tone field, press the left/right button of the navigation key to choose a ring
tone you like. Or press the left soft key to display a ring tone list, move the cursor to
select a desired one and then press [OK].
In the Ring Tone Volume field, press the left/right button of the navigation key to adjust
the volume.
In the Alarm mode field, press the left/right button of the navigation key to choose a mode.
- Once: activates the alarm at a set hour on a set day.
- Recurrent: activates the alarm at a set hour every day of the week. If you choose
the Recurret mode, you can press the left soft key to display a list, and then select
the day/days when the alarm is unnecessary by pressing the the left soft
key[Cancel].
Press [OK] to save the alarm setting.
The alarm clock will ring even if you turned off your phone. The alarm will stip ringing
temporarily whenyou press any key (excep the right soft key and the volume keys) or when the
ring time is out, then it will ring again around 5 minutes later. To stop the alarm repetition, press
the right soft key when it rings. (The snooze mode is automactcally deactivatedafter 3 alarm
repetitions。)
PC communiction
You can use the i-Sync software supplied with your phone to synchronise with your PC.
Others
Notepad
You can write notes to be stored in your phone.
Adding a notepad entry
1
If you have previously saved some entries in the Notepad, press [OK], select Add, and press [OK]. If
there are no existing entries, press Add.
2
Enter the information in the Title and Notes fields.
3
Press [OK] to save the record.
Searching for a notepad entry
1
On the Notepad screen, press [OK], select Search, and press [OK].
2
Enter the keyword and press [OK] to start searching.
3
The entry or entries that include(s) the keyword will be displayed.
Modifying a notepad entry
1
On the Notepad screen, scroll to the entry you would like to edit.
Or, on the browsing screen of a notepad entry, press [OK] and select Edit.
2
Press [OK].
3
Modify the contents of the entry.

Advertisement

Table of Contents
loading

Table of Contents