Hanging bolt
(W3/8 or M10)
Nut
(W3/8 or M10)
Spring washer
(M10)
• The following parts is option.
① Hanging Bolt
- W 3/8 or M10
② Nut
- W 3/8 or M10
③ Spring Washer - M10
④ Plate Washer
- M10
CAUTION: Tighten the nut and
bolt to prevent unit falling.
*( ) → TQ/TR : 31~34mm
TP : 15mm
Keep the length of the bolt
from the bracket to 40mm
Flat washer for M10
(accessory)
Ceiling board
Flat washer for M10
(accessory)
Nut
(W3/8 or M10)
Adjust the same height
Ceiling
Air Conditioner body
Keep the length of *( )mm between
the air conditioner bottom surface
and the ceiling surface
Paper model
Set screw of
paper model (4 pieces)
for installation
Open the ceiling board
along the outer edge of the
paper model
• Drill the piping hole on the wall slightly tilted to the
outdoor side using a Ø 70 hole-core drill.
Wall
Indoor
Installation of Indoor
Ceiling board
Outdoor
Installation Manual 9