Back Panel - Peachtree decco 125 Manual

ANT-1
RoHS
AC~IN
Serial Number
B
B AC INPUT: For connection to a 100-240VAC 50/60Hz AC outlet using the included
power cord.
C ANT-1 & 2: RF antenna inputs for use with wireless input equipped units. Connect both
antennas if the decco is or will be located in a spot where the wireless network signal
strength is weaker. Check this by placing a mobile device in the spot the decco is or
will be located and reading the wireless network signal strength. If all "bars" are lit, you
shouldn't need to utilize the antennas. If fewer "bars" are lit, utilized the antennas to
ensure optimal wireless performance.
D SERVICE ONLY: This is NOT a USB audio input! Reserved for service use.
E USB-B INPUT: Accepts digital audio input up to 24-bit/96kHz PCM from a computer.
F GROUND: Accepts the ground connection from a phonograph/turntable.
G OPTICAL INPUT: Accepts S/PDIF digital audio input from an optical (Toslink style)
output up to 96kHz. Optical digital audio outputs are common on digital audio sources
including; streaming audio devices, disc players, cable boxes and HDTVs.
H AUX ANALOG INPUT (L) (R): Accepts line level input from devices with analog outputs.
If the device also has a digital audio output, it may provide better sound quality.
I PHONO INPUT (L) (R): Accepts input from a phonograph/turntable with a moving
magnet (MM) cartridge.
J PRE-OUT: Provides analog audio output to connect to a powered subwoofer or an
external power amplifier. Note: the RIGHT and LEFT speaker outputs remain active
when the PRE OUT is used and both sets of outputs are automatically muted when the
mute function is engaged or when headphones are connected to the front panel. Note:
The PRE-OUT is not available when the decco is used with the optional Peachtree
Audio duet speaker system.
K RIGHT & LEFT SPEAKER OUTPUTS: Speaker binding post outputs that accept
banana style, spade or bare wire speaker cable terminations. The binding posts are
clearly marked RIGHT and LEFT with red (+) and black (-) for proper connections with
the speakers. Please check that all of the ends of the speaker cables are connected
with the correct polarity; positive-to-positive and negative-to-negative. Wiring positive-
to-negative or negative-to-positive should not cause any damage but it does alter
the phase and therefore the sound the speakers create. Note: the RIGHT and LEFT
speaker outputs are automatically muted when the mute function is engaged or when
headphones are connected to the front panel.
L Rear Panel Hand Screws (4): Hand screws provided for the installation of the rear
panel included with the optional Peachtree Audio duet speaker system. Please do not
remove these screws unless you are installing this option.

BACK PANEL

ANT-2
Gnd.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE !
USB-B OPTICAL
SERVICE SERVICE
INPUT INPUT
ONLY
DESIGNED IN CANADA
MADE IN CHINA
C D E F G H
L L
L
R R
R
AUX PHONO
125
PRE OUT
Type: Integrated Amplifier
Model: Decco125
Maximum power consumption is 400W
I J
RIGHT LEFT
SPEAKER
SPEAKER
OUTPUT OUTPUT
K L