Peachtree decco 125 Manual page 8

B
C
D
E
F
G
H
I
malfunction of the remote control. If the source does not respond to these commands, it
does not support them.
G USB Button: This button selects the USB-B input and lights the LED blue.
H OPT Button: This button selects the OPT input and lights the LED blue.
Note: The inputs buttons will also toggle the unit into On mode when in Standby mode
for faster access.
I 1 2 3 4: Reserved for wireless network input use. For more information on the wireless
network input, please refer to that section.
J MUTE Button: Mutes and un-mutes the RIGHT & LEFT Speaker and headphone
outputs. Note: the currently selected input LED will flash white while the output is muted.
K TREB Button +/-: Increases or decreases the TREBle (high frequencies).
L FLAT Button: Sets the bass and treble control to "FLAT" (no increase or decrease
applied).
M PHONO Button: This button selects the PHONO input and lights the LED blue.
N AUX Button: This button selects the AUX input and lights the LED blue.
REMOTE
B On/Standby Button: With the AC power cord
connected, this button toggles the unit between
On mode (which selects the last input used) and
Standby mode which lights the LED red. Note:
J
the input LEDs will flash white in a sequence
when the unit goes into on or standby mode.
K
C BASS +/-: Increases or decreases the BASS
(low frequencies). The front panel input LEDs
will display the bass level with FLAT indicated
L
by the middle LED being lit Blue.
D VOL /: Increases and decreases the output
level. Note: the volume level will be indicated for
~2 seconds using the 5 blue input LEDS on the
front panel. Each LED represents ~20% of the
M
entire volume range.
E Wireless Network: This button selects the
optional Wireless network input and lights the
N
LED blue. This button does not function if the
wireless network feature is not enabled. For
more information on the wireless network input,
please refer to that section.
F Transport Control Buttons: Controls playback
of compatible sources connected.
the previous track or the beginning of the
current track if playback is in progress.
toggles between play mode and pause mode.
selects the next track in the current queue

or list. Please note that some USB capable
devices and wireless
may not support these controls. This is not a
selects

streaming applications
 