Maintenance After Use - Pyle PUCWM11 Instruction Manual

Single tub washing machine
Table of Contents

Advertisement

1. Pull out the power cord and hang it on the hook on the side of the washing
machine.
2. Thoroughly drain out the water from the wash tub.
3. Turn the Wash Selector to Normal position.
4. Clean the washing machine and hang the drain hose to the hook on the side of
the machine. 3. Use low foaming/high--density laundry powder or liquid
detergent for more
effective washing.
4. Use of warm (not hot or boiling) may improve washing effect.
5. Remove the water supply inlet hose and remove the water from it and place
hose nside the wash tub.
6. Let the machine air dry in a ventilated place before putting back the Lid Cover.
7. When the washing machine has been used for some time, some fabric naps
may accumulate underneath the pulsator. If this piles-up, it may affect the
normal running of the roll-stick. To check and clean this, take out the pulsator
by unscrewing it carefully. Clean the pulsator by subjecting it by running water
and brushing it lightly. Do not use steel brush. Clean the base of the wash tub
also for any fabric naps. Return the pulsator to its proper position. It is
suggested that you clean it once a month.
LEVEL OF
Soiled Mode
Wash Time
(Minutes)

MAINTENANCE AFTER USE

TABLE 1.WASH MODE AND WASH/RINSE TIME
SILK WOOL
Chemical Light
Soiled
2-5 Minutes
COTTON, HANG
COTTON & HEMP
Cotton, Linen,
Seriously Soiled
Normal
5-10 Minutes
10-15 Minutes

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents