Circuit Diagram - Pyle PUCWM11 Instruction Manual

MAINTENANCE AFTER USE
PROBLEM
PULSATOR
STOP
RUNNING
ABNORMAL
NOISE Pulsator is jammed due to foreign matter
VIBRATION
PULSATOR
RUNS AT ABNORMAL
SPEED
CIRCUIT
DIAGRAM
Black
Connected patch
with ground
POSSIBLE CAUSE
Power Failure (Blackout)
Plug is loosely connected
V-Belt drops off
Loose pulley
Jammed pulsator due to foreign matter
Friction between pulsator and wash tub
V-Belt too tight
Slackened of worn-out V-Belt
Loose motor fixing screws
Grey
Purple
Grey
Purple
White
Yellow & Green
*Specification & appearance are subject to change without notice.
REPAIR
Insert Plug
Call service technician to put back the V-Belt
Call service technician to tighten pulley screw
Remove foreign object immediately
Call service technician to adjust gap between
them
Remove foreign object immediately
Call service technician to put back the V-Belt
Call service technician to put back the V-Belt
Replace V-Belt
Call service technician to tighten the V-Belt and
screws
Call service technician to fix the machine
Yellow
Timer of Washing
Soft
Red
Red
Grey
Motor
Yellow
Capacitor
Blue