General - Sony SLV-ED212 Service Manual

Table of Contents

Advertisement

Step 2
Setting up the remote commander
Inserting the batteries
Insert two size AA (R6) batteries by
matching the + and – on the batteries
to the diagram inside the battery
compartment.
Insert the negative (–) end first, then
push in and down until the positive
(+) end clicks into position.
Using the remote commander
You can use this remote
commander to operate this VCR
and a Sony TV. Buttons on the
remote commander marked with
a dot (•) can be used to operate
your Sony TV. If the TV does not
have the g symbol near the
remote sensor, this remote
commander will not operate the
TV.
TV/VIDEO
To operate
Set
to
VIDEO and point at the remote sensor on the VCR
the VCR
TV and point at the remote sensor on the TV
a Sony TV
Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove
the batteries to avoid possible damage from battery leakage.
• Do not use a new battery with an old one.
• Do not use different types of batteries.
Step 3
Hookup
Audio/video (A/V) hookup
If your TV has audio/video (A/V) input jacks, you will get a better picture
and sound when you hook up your VCR using these connections. If your TV
doesn't have A/V inputs, see the following page for antenna hookup.
For SLV-ED919KR only
For a true "home theater" experience, you should connect the audio outputs
of your VCR or TV to your stereo system.
A Use this hookup if your TV has stereo jacks
VCR
TV
AUDIO VIDEO
LINE-1
IN
IN
LINE
OUT
VIDEO
AUDIO
Audio/video cable (not supplied)
B Use this hookup if your TV doesn't have stereo jacks
VCR
TV
AUDIO VIDEO
LINE-1
IN
LINE
OUT
IN
VIDEO
AUDIO
Video cable (not supplied)
Audio cable (not supplied)
Note
• To listen to playback sounds in stereo, you must use the A/V connection.
SECTION 1

GENERAL

Remote sensor
TV/VIDEO
continued
5
Getting Started
Stereo receiver
AUX IN
AUDIO OUT
Audio cable (not supplied)
Stereo receiver
AUX IN
continued
7
Getting Started
SLV-ED212/ED717/ED818/ED919/LF1
This section is a translated
version of Instruction Manual
SLV-ED919KR model.
Part number: 3-066-368-11
Step 2: Setting up the remote commander (continued)
Controlling other TVs with the remote commander
(SLV-ED919KR only)
The remote commander is preprogrammed to control non-Sony TVs. If your
TV is listed in the table below, set the appropriate manufacturer's code
number.
1
Set
TV/VIDEO
at the top of the remote commander to
2
Hold ?/1 down, and enter your TV's code number(s) using the number
buttons. Then release ?/1.
Now you can use the ?/1, VOL +/–, CH +/– and TV/VIDEO buttons to
control your TV. You can also use the buttons marked with a dot (•) to
control a Sony TV. To control the VCR, reset
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until
you find the one that works with your TV.
Manufacturer
Code number
Sony
01
Akai
04
AOC
04
Centurion
12
Colonad
03
Curis-Mathes
12
Emerson
03, 04, 14
Fisher
11
General Electric
06, 10
Gold Star
03, 04, 17
Hitachi
02
JVC
09
Magnavoc
08
Marantz
13
Notes
• If the TV uses a different remote control system from the one programmed to work
with the VCR, you cannot control your TV with the remote commander.
• You may not be able to use some buttons to control non-Sony TVs due to the remote
commander's signal limitations.
• If you enter a new code number, the code number previously entered will be erased.
• When you replace the batteries of the remote commander, the code number may
automatically reset to 01 (Sony). If your TV is not a Sony, it is recommended to
manually set the appropriate code number every time you replace the batteries.
6
Getting Started
Step 3: Hookup (continued)
For SLV-ED717KR and ED212KR only
A Use this hookup if your TV has stereo jacks
AUDIO VIDEO
LINE-1
IN
LINE
OUT
B Use this hookup if your TV doesn't have stereo jacks
AUDIO VIDEO
LINE-1
IN
LINE
OUT
8
Getting Started
1-1
TV
.
TV/VIDEO
to
VIDEO
.
Manufacturer
Code number
MGA/Mitsubishi
13
Panasonic
06, 19
Philips
08
Pioneer
16
Quasar
06
Radio Shack
05, 14
RCA
10
Sanyo
11
Sears
07, 11
Sharp
05, 18
Sylvania
08
Teknika
14
Toshiba
07
Zenith
15
VCR
TV
IN
VIDEO
AUDIO
Audio/video cable (not supplied)
VCR
TV
IN
VIDEO
AUDIO
Audio/video cable (not supplied)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents