Table of Contents
Advertisement
3 Functions and features
With temperature sensors connected the unit monitors the system temperature in
machinery and plant
Connectable temperature sensors:
•
Temperature sensors TS or TT
•
Resistance thermometer RTD (Pt 100 or Pt 1000)
The unit automatically detects the connected sensor type and configures itself ac-
cordingly The electrical measuring method (3-wire or 4-wire sensor) is determined
via the menu setting (→ 9.5.1).
4 Function
4.1 Communication, parameter setting and evaluation
•
The unit displays the current system temperature
•
It generates 2 output signals according to the parameter setting
OUT1
Switching signal for system temperature limit value
OUT2
Switching signal for system temperature limit value
•
It moreover provides the process data via IO-Link
•
The unit is laid out for fully bidirectional communication So, the following op-
tions are possible:
-
Remote display: Reading and displaying the current system temperature
-
Remote parameter setting: Reading and changing current parameter settings
with the FDT service program ifm Container or via IO-Link
-
Using the FDT service program ifm Container, the current parameter settings
can be stored and transferred to other units of the same type
The program library of the available DTM objects can be found at wwwifmcom
→ Service → Download.
Device-specific parameter lists for IO-Link parameter setting are available at:
www.ifm.com → Select your country → Data sheet direct:
4
Advertisement
Table of Contents
