Charging The Battery; Powering Your Phone On/Off - Pantech ADR910L User Manual

Table of Contents

Advertisement

GETTING STARTED

CHARGING THE BATTERY

1
Connect the USB cable into the Wall/USB Charger.
Note Make sure to align the connector as indicated in the
image. Otherwise, the charging connector will be damaged
and the battery will not be charged.
2
Plug the USB cable into the phone's charging port. Plug the Wall/
USB Charger into an electrical outlet. The battery starts charging.
3
Disconnect the charger when the battery is fully charged.

POWERING YOUR PHONE ON/OFF

It's important to fully charge the battery before turning on your
phone.
1
Ensure that the 4G SIM card and the battery are safely installed
in your phone.
18

Advertisement

Table of Contents
loading

Table of Contents