Installing The Battery; Removing The Battery - Pantech ADR910L User Manual

INSTALLING THE BATTERY

1
Hold your phone tightly after removing the battery cover.
2
Align the battery contacts (1) with the terminals in the battery
compartment.
3
Press the battery down (2) until it clicks into place.
4
Replace the battery cover over the battery compartment, slide it
upward until it clicks into place.

REMOVING THE BATTERY

1
Hold your phone tightly after removing the battery cover.
2
Remove the battery from the battery compartment by lifting the
top of the battery using the fingertip cutout.
ABOUT BATTERY
The ADR910L uses a Lithium Ion (Li-Ion) battery. Make sure to use
the authorized battery and charger only. Maximum hours to use the
battery might vary depending on service types offered by the service
provider and temperatures. For more details, contact your nearest
dealer.
GETTING STARTED
17