Table of Contents
Advertisement
Quick Links
S2000-IK Rev.04
Addressable Curtain PIR Motion Detector
GENERAL
S2000-IK Revision 04 Addressable Curtain Passive Infrared (PIR) Motion Detector (hereinafter referred to as the
detector) is designed to be used indoors. It detects intrusion into protected areas and sends an alarm message to the
connected S2000-KDL controller via the two-wire multiplex addressable polling loop.
The S2000-IK rev.04 has a two-dimensional coverage pattern ("vertical curtain").
The detector provides increased immunity against lighting and radio frequency interference.
KEY FEATURES
Dual-element pyro-electric infrared sensor
High-density coverage offering high probability of detecting an intruder
Protected against insects entering to the pyro-electric infrared sensors
Arranging sabotage-resistant zones just beneath the detector prevents unauthorized access to the detector.
Digital signal processing
Powered via the multiplex addressable polling loop of the S2000-KDL
Supports DPLS_v2.xx protocol
SPECIFICATIONS
Detection Range
Coverage Pattern
Input Voltage (from a S2000-KDL)
Current Consumption (via the loop of the S2000-KDL)
Horizontal Angle of Sight
Operating Temperatures
Humidity
Overall Dimensions (H x W x D)
Weight
Mounting Height
MOUNTING LOCATION CONSIDERATIONS
The detector is intended to be used indoors. Considering a
location to mount the detector, please take into account that
the detection zone must not be obscured by any non-
transparent objects such as curtains, houseplants, cabinets,
room dividers, etc. as well as by glass or mesh partitions.
Do not locate the detector where it can be exposed to false
alarm sources such as windows, air conditioners, heaters,
radiators, etc.
Wires of the multiplex addressable polling loop should be
located away from high-voltage electric cables.
The detector allows wall or corner mounting at a height of
2.3 m above the floor. This provides the detection range at
least 10 meters. The detection pattern is shown in Figure 1.
INSTRUCTION MANUAL
10 m
Curtain (two-dimensional)
8 ÷ 10 VDC
0.5 mA max when indication is off
6°
−30 to +50° C
95% at 25° C, non-condensing
105 mm × 75 mm × 56 mm max
0.1 kg max
2.3 meters
Figure 1: S2000-IK Rev.04 Detection Pattern
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for bolid S2000-IK
Summary of Contents for bolid S2000-IK
- Page 1 INSTRUCTION MANUAL GENERAL S2000-IK Revision 04 Addressable Curtain Passive Infrared (PIR) Motion Detector (hereinafter referred to as the detector) is designed to be used indoors. It detects intrusion into protected areas and sends an alarm message to the connected S2000-KDL controller via the two-wire multiplex addressable polling loop.
- Page 2 The S2000-IK rev.04 to operate properly within two-wire addressable polling loop of the S2000-KDL controller, it must be assigned to a unique number 1 to 127 within the loop – the address which is stored in the S2000-IK rev.04 non-volatile memory (EEPROM).
- Page 3 PC using the UProg Configuration Tool. The parameter Device Indication Control of the S2000-KDL polling loop input zone which is assigned to the S2000-IK rev.04 should be set to a proper value. By default, Device Indication Control is set to the value of 1, providing LED indication in accordance with the detector’s own pre-determined algorithm.
- Page 4 BOLID ONE YEAR LIMITED WARRANTY Bolid Company and its divisions and subsidiaries («Seller»), 4 Pionerskaya Str., Korolev 141070, Moscow Region, Russia warrants its security equipment (the «product») to be free from defects in materials and workmanship for one year from date of original purchase, under normal use and service.
Need help?
Do you have a question about the S2000-IK and is the answer not in the manual?
Questions and answers