Using Belt Positioning Clip - Graco TurboBooster TakeAlong Instruction Manual

Using Belt Positioning Clip

1. Make Sure Vehicle's Seat Shoulder Belt Lays in the
Red Zone As Shown
If the vehicle's seat shoulder belt lays outside this zone, you
MUST use the belt positioning clip.
2. Attach Belt Positioning Clip
The shoulder belt positioning
clip MUST be attached to the
slot on the bottom of the base.
Insert the loop end of strap
through the slot on bottom of
seat exactly where shown.
3. Push Clip and Strap Through Loop
Pass the clip and the strap through the loop end as shown
and pull strap up.
33