Configure Your Firewall; Watchguard M200 Firewall Configuration - Watchguard Firebox M200 Configuration Manual

QoS Configuration Guide | WatchGuard M200

Configure Your Firewall

WatchGuard M200 Firewall Configuration

To review the Quick Start Guide for the WatchGuard M200 click here. See the WatchGuard M200 Hardware Guide here.
1. Log into your WatchGuard. For information about logging into your WatchGuard GUI for first time setup, please refer to the
WatchGuard Quick Start Guide.
2. Navigate to 'Firewall' and select subcategory 'Aliases'. (Figure 1)
| Configure Your Firewall
Figure 1
Brand: WatchGuard
Model: M200
Firmware version: 11.12.4
a. Once under 'Aliases', select
'Add'. Name the new alias,
"RingCentral Servers".
b. Under 'Alias Members' select
'Add'. Create a new entry for
each of the following servers
found here under Section 7:
RingCentral Supernets.
c. Hit 'Save' once all server
Supernets have been added.
4