Part Names And Functions; Deck Section; Effect Section; Sync Button - Pioneer DDJ-SP1 Quick Start Manual

Part names and functions

The typical functions of the buttons and controls when using Serato DJ
are described below.
For the functions and details of buttons and controls not described here,
see the Operating Instructions (Advanced Edition).
1

1 Effect section

2 Deck section

3 Browser section
Effect section
1
ON ON
FX
SELECT SELECT
5
1 Effect parameter controls
These adjust the effects' parameters.
2 FX BEATS control
Adjusts the effect time.
3 FX ASSIGN buttons
Press:
Turns the effects unit for deck 1 or deck 2 on and off.
[SHIFT] + press:
Turns the effects unit for deck 3 or deck 4 on and off.
4 TAP button
Press:
When the [TAP] button is pressed three times or more while in the
auto-tempo mode, the mode switches to the manual tempo mode.
When the tap tempo mode is set to manual, the BPM value to serve
as reference for the effect is calculated from the intervals at which
the button is tapped.
When the [TAP] button is pressed for over 1 second while in the
manual-tempo mode, the mode switches to the auto tempo mode.
[SHIFT] + press:
Switches the effect mode.
5 Effect parameter buttons
Press:
These turn the effects on and off or switch the parameters.
[SHIFT] + press:
Switches the effect type.
4
En
3
2 3
1
3
2
4
ON TAP
FX FX FX
SELECT MODE 3
PANEL SELECT
4
Deck section
2

1 SYNC button

Press:
The tempos (pitches) and beat grids between tracks on multiple
decks can be synchronized automatically.
[SHIFT] + press:
Cancels the sync mode.
2 SLIP button
Press:
Turns the slip mode on and off.
[SHIFT] + press:
Sets Serato DJ to the relative mode.
1
2
3 CENSOR button
Press:
4
The track is played in the reverse direction while the [CENSOR] but-
ton is pressed, and normal playback resumes when the button is
released.
[SHIFT] + press:
Sets Serato DJ to the internal mode.
4 PARAM.1/PARAM.2 button
Press:
Sets a parameter for the loop roll, auto loop, slicer, manual loop and
sampler modes.
[SHIFT] + press:
Sets a different parameter for the auto loop, slicer and manual loop
modes.
5 AUTO LOOP control
Turn:
Selects the auto loop loop beat.
Press:
Turns the auto loop function on and off.
[SHIFT] + press:
Switches to the mode for using Serato Video.
6 Pad mode button
Press:
Selects the pad mode from among the hot cue, loop roll, slicer and
sampler (velocity disabled) modes.
[SHIFT] + press:
Selects the pad mode from among the hot loop, auto loop, manual
loop and sampler (velocity enabled) modes.
7 SAMPLER VOLUME fader
Adjusts the sampler's overall sound level.
8 Performance pads
Used for hot cue, hot loop, loop roll, auto loop, slicer, manual loop
and sampler playback.
1 2 3 4
AUTO LOOP
SLIP CENSOR PARAM.1
SYNC
OFF
REL. INT. PARAM.2
HOT CUE ROLL SLICER SAMPLER
HOT LOOP AUTO LOOP MANUAL LOOP VELOCITY
LOOP ACTIVE SAVE SLOT
SLOT
IN OUT RELOOP / EXIT
8
PANEL SELECT
5
• BACK LOAD
— UTILITY PREPARE
6
VIEW AREA
LOAD LOAD
SHIFT
SAMPLER VOL
7