LCD
Menu SettingS
DtV Setup
● configuration: (Refer to p.34)
● edit channels: (Refer to p.33)
● installation:
- Auto Search / Manual Search: (Refer to p.31)
- Software update: (Refer to p.36)
- Default Setting: (for Digital TV Mode Only)
Sets the current all settings of the Digital TV mode to the default
settings.
note:
▪
Please note that once you perform the Default Setting, all data such
as digital channel list, and user configured data are deleted.
▪
After completing the default setting, the installation wizard for digital
channels will appear automatically in a few seconds.
▪
For more information about Default Setting of the analog channels,
refer to p.6.
● System
-
Status: You can view system information.
-
Signal Detection: You can view the signal strength and signal
quality of the channel that is currently on air.
-
common interface: You can view the current status of the CI
Module (Conditional Access Module).
note: The displayed information about a Common Interface may differ depending on Common Interface type
GB-8
LCD
(in Digital tV Mode only)
:
> DtV Setup
> D t V S e t u p
DT V Setup
Enter
Configuration
Edit Channels
Installation
System