BASic operAtion
Selecting the Main input Source
Once you have connected your various audio and video systems, you can view different sources by selecting input
sources.
1
Press the AV button.
2
Select a main input among the sources and press the oK button.
note: You can easily switch to digital TV from different sources by pressing the tV/DtV button.
Setting the Aspect ratio
You can select an aspect ratio mode by pressing the ZooM button repeatedly on the remote control.
Auto - regular - panoramic - 14:9 Zoom - 16:9 Zoom - 16:9 Zoom Subtitle - full
Regular
16:9 Zoom
note:
▪
When Auto is selected, you can select a default aspect ratio for 4:3 signal. (except when 480p/576p mode)
(Refer to p.6)
▪
When the component or HDMI input mode with 480p or 576p signal, you can select only the Auto, Full or Regular.
▪
When the component or HDMI input mode with 720p or 1080i signal, you can select only the Full, HD Zoom or Slim.
Full
▪
For pictures with a 16:9 aspect ratio that have been squeezed into a normal picture (4:3 aspect ratio), select Full mode to
restore their original dimensions.
to move the picture vertically:
If you cannot see subtitles at the bottom of the screen, or if the top or bottom is cut off, move the picture vertically
using the ▲/▼ button before the display disappears.
note: If you change the aspect ratio mode, the picture returns to its default position.
note:
▪
For LT-9DA9BN model, you can select the follow modes.
Auto – regular – panoramic – Zoom – Zoom Subtitle – full
GB-0
Panoramic
SUBTITLE
SUBTITLE
SUBTITLE
16:9 Zoom Subtitle
SUBTITLE
SUBTITLE
SUBTITLE
SUBTITLE SUBTITLE
SUBTITLE
HD Zoom
14:9 Zoom
Full
Slim