Rear Panel - Planet ICA-108 Quick Installation Manual

3.3.2 Rear Panel

DC Power Jack
Audio Output Jack
Audio Output
Jack
DC Power Jack
LAN Socket
Factory Default
Reset
Audio-out Jack allows this device to output audio or alerting
sound.
The input power is 12VDC.
NOTE: Only use the power adapter supplied with ICA-501.
Otherwise, the product may be damaged.
The LAN socket is a RJ-45 connector for connections to
10Base-T Ethernet or 100Base-TX Fast Ethernet cabling. This
Ethernet port built N-Way protocol can detect or negotiate
the transmission speed of the network automatically. Please
use Category 5 "straight through" cable to connect the ICA-
501 to a 100Mbps Fast Ethernet network switch or hub.
NOTE: If you need to connect the ICA-501 to PC or
notebook directly, you should use cross over cable instead.
This button is hidden in the pinhole. Keep press this button
over will reset the IP camera into factory default.
Factory Default
LAN Socket