Table of Contents
Advertisement
5. Using NFC for pairing
When a smart phone or tablet device is equipped with NFC, Bluetooth pairing (and
depairing) can be performed simply by merely swiping the device over the headphones.
• Supported OS: Android 4.2 and later.
• Depending on the smart phone or tablet device used, the NFC signal reception may
be too weak to perform one-touch connections. The unit may pair with a device
other than the desired one if multiple NFC devices are nearby. In that case, follow
the manual pairing procedure outlined in step 4.
How to set pairing
(1) Hold the ( ) button depressed while the unit's power is turned off to enter the pairing
mode.
(2) Pass the "N" mark on the device to be paired closely over the "N" mark on L side
housing. (see Fig. 5).
(3) The device will automatically begin setting the pairing.
Pairing is completed if the LED indicator blinks in blue once every three seconds.
* Only one device can be connected at a time.
Disconnecting
With the other device connected to the headphones, pass the "N" mark on the device
closely over the "N" mark on L side housing.
The connection will be automatically undone.
Depending on the specifications of the connected Bluetooth device, the connection
cannot be terminated from the NFC device. In that case, perform the procedure of
"Disconnecting from the Bluetooth device" in "4. Pairing".
11
En
Hide quick links:
Advertisement
Table of Contents
