Yellow Line 4K/IP Extender
8. WEB USER INTERFACE CONFIGURATION
The relevant information of the connected extender and setting
8.1.1 [Version Information]
Indicating the firmware version and relevant information of the devices
Figure 11
8.1.2 [Update Firmware]
To update the firmware of the connected extender, please click on the [Select
File] to select the firmware and click on [Upload] to upload the firmware and
update accordingly.
Transmitter Firmware Update: please select [webfwh.bin] to update
Receiver Firmware Update: please select [webfwc.bin] to update
It takes time to update the firmware. During the process of update, the Web
user interface shows the status as below diagram. The extender system
will reboot automatically after updating firmware. If it doesn't reboot
automatically, please reboot to apply the new firmware manually.
www.movingcolors.eu
19