Table of Contents
Advertisement
Yellow Line 4K/IP Extender
7. IP CONFIGURATION
The 4K HDMI & USB Over IP Extender can configure via LAN in the same
subnet.
1. Assign a LAN IP address to the computer in the same subnet. The IP
address default of the Transmitter and Receiver is B class Networking:
169.254.xxx.xxx.
Figure 6 Internet Protocol (TCP/IP) Properties
2. Connect the TX and RX with the Ethernet switch, Then connect the PC with
the Ethernet switch.
Because this unit support DHCP, Different unit with different IP address of the
factory reset, so The first thing we need know the IP address of each unit.
There is two way to get the IP address
1) Via "Node List"
Open the "Node List "in the "Tool" file, Press twice the "Node_list.bat" to enter
the dialog box. Then we can see all the IP address of both the TX and RX
show as bellow black dialog box.
www.movingcolors.eu
15
Advertisement
Table of Contents
