Table of Contents
Advertisement
Yellow Line 4K/IP Extender
6. INSTALLATION
Device Connection
•
Check the power supply is unplugged.
•
Set up the group of the transmitter with the correspondent receiver
for signal extension and display.
•
Connect the Transmitter to video source with HDMI cable, and
connect Receiver to a monitor or display with HDMI cable.
•
Connect the USB cables from Transmitter to PC, and connect the
USB additional devices such as USB mouse, USB keyboard and
USB pen drive to Receiver.
•
Connect Transmitter and Receiver to the Ethernet switch with
network cable.
•
Power on the Transmitter, Receiver and all the connected devices.
•
Power on and activate all the connected devices.
•
Connect the IR extension cable with Transmitter and the IR receiver
cable with Receiver for remote control.
Typical application:
Figure 1
www.movingcolors.eu
11
Advertisement
Table of Contents
