Braking; Adjusting The Brake - Volaris S7 SMART Instructions For Use Manual

Safe braking action with your S7 SMART
The brake is released by
tipping up the parking brake
device till you hear a clicking
sound. See the sketches.
Travelling Brake
Travelling Brake
The brake is activated
by pulling up the lever
underneath the handle.
Doability Limited, Unit I7B, Hornbeam Park Oval, Hornbeam Park, Harrogate, HG2 8RB
Parking Brake
Parking Brake
The parking brake is
activated by tipping
down the parking brake
device and locking it by a click.
The parking brake should
not be locked when
adjusting the height of the
handles or of the brakes.
6
Adjusting the brake to obtain correct function
The braking force can be
adjusted by adjusting the
regulating wire located
underneath the frame.
device.
1. Fold up the parking brake
2. Turn the threaded shaft shown on the sketch. This can be done
3. Tighten the adjusting screw, if you want to increase the braking
power. Slacken the adjusting screw , if you want to reduce the
braking power.
4. Check the distance
between the brake shoe
and the wheel. The distance
should be approx. 2 mm. If
you set the brake too tight,
the parking brake will be
unnecessarily slow to apply.
P 01423 740450, F 0113 3410395, E info@doability.co.uk, W www.doability.co.uk
Call 01423 740450
7