Yamaha RS7000 Service Manual page 20

RS7000
Replacind the Bottom Cover
IMPORTANT
When replacing the bottom cover, be sure that you do not
get cables caught or pulled between the cover and main unit.
This could cause broken connections or malfunctions.
Procedure
1. Holding both sides of the bottom cover with both hands, lower
the cover straight down from above to its original position.
2. Use the original screws to re-attach the bottom cover.
• Replace the twelve screws to fasten the bottom cover.
CAUTION
Do not use screws other than those removed in step 3. Other
screws can damage the unit.
Holes B in the diagram below are not screw holes. Be careful
not to insert screws into these holes.
3. Carefully turn the unit right side up.
20
B