File: Stats.csv - General Sleep Zmachine Insight+ DT-200 Service Manual

Column 6: Events
These are events related to patient alerting (Insight+ only).
0 = Patient alerting is not enabled.
1 = Patient alerting is enabled.
2 = Patient woke from at least 5 minutes of sleep within a 6 minute sliding window, but not
enough sleep to achieve sleep maintenance. Alerts will now be suspended for the next 10
minutes (this can happen no more than once per session).
3 = Patient achieved 10 minutes of sleep within a 12 minute sliding window. This suspends
the sleep onset rule, and arms the sleep maintenance rule.
4 = Alert generated (audible and LCD message) for patient to leave bed.
Column 7: Temporary Signature?
This column is related to data requirements.
0 = Report generated normally with the data requirement satisfied (default: 2 days & 12
hours). This requirement can be changed using the Zmachine Data Viewer.
1 = Report generated with less data.
Column 8: Arousal
This column is related to the detection of an EEG arousal when the epoch is scored as sleep.
0 = No arousal detected.
1 = Arousal detected.

File: Stats.csv

This is an example of Stats.csv as viewed in a spreadsheet:
1 2
Day Start Date
8 9
WASO
SPT2 (hrs)
(min)
15 16
Deep Sleep
Deep Sleep
Latency
(hrs)
(min)
Column 1: Day
This is the recording day number (0, 1 , 2, ... format). Statistics are generated for each day.
Column 2: Start Date
This is the date of the start of each 30-second epoch (mm/dd/yyyy format).
Column 3: Start Time
This is the start time of each 30-second epoch (hh:mm:ss 24-hour format).
26
3 4
Start Time SPT (hrs)
10 11
TST2 (hrs) SE2 (%)
17 18
REM
Latency REM (hrs)
(min)
5 6
TST (hrs) SE (%)
12 13
WASO2
LPS2 (min)
(min)
19 20
Deep Sleep REM
Latency2 Latency2
(min) (min)
Sleep Report and Statistics Files
7
LPS (min)
14
Temporary
Signature?
21
Total Light
Sleep (hrs)