Turning On Tv; Channel Selection; Volume Adjustment - Zenith Z32LC6D Installation And Operating Manual

Zenith.book Page 32 Wednesday, April 2, 2008 11:46 AM
WATCHING TV / CHANNEL CONTROL

TURNING ON TV

First, connect power cord correctly.
At this moment, the TV switches to standby mode.
In standby mode to turn TV on, press the
button on the TV or press the POWER, INPUT,
Number (0~9)
Select the viewing source by using the
control.
This TV is programmed to remember which power state it was last set
to, even if the power cord is out.
When finished using the TV, press the
control. The TV reverts to standby mode.
NOTE
!
If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

CHANNEL SELECTION

Press the
CH (

VOLUME ADJUSTMENT

Adjust the volume to suit your personal preference.
Press the
VOL (+
If you want to switch the sound off, press the
You can cancel the Mute function by pressing the
button.
32
button on the remote control.
INPUT
POWER
or or buttons to select a channel number.
) NUMBER
or button to adjust the volume.
-)
MUTE
, INPUT, or
CH ( )
or
CH ( ),
button on the remote
button on the remote
button.
or or
MUTE VOL (+ -)