Turning On Tv; Channel Selection; Volumeadjustment - Zenith Z32LC6D - 720p LCD HDTV Installation And Operating Manual

WATCHING TV / CHANNEL CONTROL
TURNING ON TV
dh
"-r
z
<
N
I
>
z
z
fT1
N
©
Z
©
@
@
First, connect power cord correctly.
At this moment, the TV switches to standby mode.
01_ In standby mode to turn TV on, press the (b/l , INPUT, CH
button on the TV or press the POWER, INPUT, CH(^ v
Number (0~9) button on the remote control.
(A or T)
or ÷ -),
Select the viewing source by using the INPUT button on the remote con-
trol.
01_ This TV is programmed to remember which power state it was last set to,
even if the power cord is out.
O When finished using the TV, press the POWER button on the remote con-
trol. The TV reverts to standby mode.
CHANNEL SELECTION
O PresstheCH(^ v or+-) or NUMBER buttons to select a channel
number.
VOLUMEADJUSTMENT
Adjust the volume to suit your personal preference.
O Press the VOL (+ or -) button to adjust the volume.
If you want to switch the sound off, press the MUTE button.
O You can cancel the Mute function by pressing the MUTE or VOL (+ or -)
button.
32