Zenith Z32LC6D Installation And Operating Manual page 24

Zenith.book Page 22 Wednesday, April 2, 2008 11:46 AM
EXTERNAL EQUIPMENT SETUP
Composite (RCA) Connection
1. How to connect
Connect the AUDIO/VIDEO jacks between TV and
VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red)
2. How to use
Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owner's manual.)
Select the
AV 1
button on the remote control.
If connected to
NOTE
!
S-Video Connection
1. How to connect
Connect the S-VIDEO output of the VCR to the
S -VIDEO input on the TV.
Connect the audio outputs of the VCR to the AUDIO
input jacks on the TV.
2. How to use
Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owner's manual.)
Select the
AV 1
button on the remote control.
If connected to
NOTE
!
S-Video provides better quality than composite. Use it
when available.
22
input source on the TV using the
IN2, select input source.
AV AV 2
If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO
jack of the set.
input source on the TV using the
IN2, select input source.
AV AV 2
INPUT
INPUT
CAUTION
Do not connect to both Video
and S-Video at the same time. In
the event that you connect both
Video and the S-Video cables,
only the S-Video will work.