Page 2
HARDWARE Package Contents GL-B1300 AC router Ethernet cable 12V/1.5A power adapter User guide Mesh Repair / Reset If you cannot access the web-based setup page or cannot connect to the router, you can press the Reset button: Press and hold for 3 seconds then release to repair your network.
FIRST-TIME SETTINGS When powered up, your router will broadcast a Wi-Fi signal with the SSID: GL-XXXXX-xxx. Plug the Internet Power cable into WAN Power In Data In Visit http://192.168.8.1 in your browser to set up your router; start by choosing your preferred language.
INTERNET SETTINGS After you have set up your router, you will see the main web interface. Find the Internet Settings icon, then click the New Connection button. Choose Cable from the pop-up Internet Settings window. Power In Data In The default protocol is DHCP. If your network needs a static setting, you can change it to Static.
Page 5
MESH NETWORK SETTINGS 2G + 5G If you have more than one GL-B1300 router, you can set up a mesh network. In a mesh network, the routers will share same Wi-Fi names (SSID) for 2G and 5G Wi-Fi networks. Power In...
WIRELESS SETTINGS Find the Wireless Settings icon, then click the Setting button. The Wireless Settings window will pop up. On the Wireless Setting page, you can change your Wi-Fi Name (SSID) and Wi-Fi Password to increase the security of your router. New changes will be in effect after you click Submit. Wireless Settings Setting LAN IP...
OPENVPN CLIENT This router supports OpenVPN client. Using OpenVPN will slow down your Internet speed because of data encryption. Click the OpenVPN icon and go to the VPN setting page. The first time it will ask you to upload your OpenVPN client configuration (ovpn files). Usually, you can download it from your OpenVPN service provider’s website or console.
Page 8
To protect against DNS leaks, you must customize your DNS servers. You can enable Force all clients to override the DNS server settings for your client devices. To customize your DNS server, go to Internet Settings > Custom DNS To get more detailed instructions or information about compatible VPN service providers, please visit http://gl-inet.com/docs/...
Page 9
DIY GUIDANCE DDWRT official firmware is not available for GL.iNet models except for GL-AR150 mini router. For further information, please visit https://www.dd-wrt.com Using above DIY features might have a risk of bricking your router. We have no obligation to provide support, maintenance, upgrades, modifications, or new releases on DIY features.
Page 10
SUPPORT 深圳市广联智通科技有限公司 深圳市宝安区石岩街道松白路创维数码大厦305-306室 ( +86-0755-86606126 )
Page 11
FCC ID: 2AFIW-B1300 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 12
Atheros IPQ4028 Quad-core ARM, @717MHz Memory / Storage DDR3L 256MB / FLASH 32MB Frequency 2.4GHz + 5GHz Transmission Rate 400Mbps (2.4G) + 867Mbps (5G) Max Tx Power 20dBm Protocol IEEE 802.11 a/b/g/n/ac Ethernet Type 10/100/1000M Power Input 1.5A Power Consumption <...
Page 13
2G + 5G Package Contents If you have more than one GL-B1300 router, you can set up a mesh network. In a mesh network, the routers will GL-B1300 AC router share same Wi-Fi names (SSID) for 2G and 5G Wi-Fi networks.
Need help?
Do you have a question about the GL-B1300 and is the answer not in the manual?
Questions and answers