To Start/Stop Off Timer Operation; To Start/Stop On Timer Operation; To Combine Off Timer And On Timer; Weekly Timer Operation - Daikin CTXA15A2V1BW Operation Manual

4 Operation
INFORMATION
Program the timer again in case of:
▪ A breaker has turned the unit off.
▪ A power failure.
▪ After replacing batteries in the user interface.
INFORMATION
The clock MUST be set correctly before using any timer
functions. Refer to "3.3.1 To set the clock" on
4.5.1

To start/stop OFF timer operation

1 Press to start.
Result: is displayed on the LCD, the timer lamp lights
up, and blinks. and the day of the week disappear from
the LCD.
2 Press or to change the time setting.
3 Press again.
Result: and the set time are displayed on the LCD.
Result: The timer lamp lights up.
INFORMATION
Each time or
advances by 10 minutes. Holding the button down will
change the setting rapidly.
4 To stop operation, press
Result: and disappear from the LCD and the timer
lamp goes off. and the day of the week are displayed on the LCD.
INFORMATION
When you set the ON/OFF timer, the time setting is stored
in the memory. The memory will be reset when the user
interface batteries are replaced.
Use of night set mode in combination with OFF timer
The air conditioner automatically adjusts the temperature
setting (0.5°C up in cooling, 2.0°C down in heating) to
prevent excessive cooling/heating
comfortable sleeping temperature.
4.5.2

To start/stop ON timer operation

1 Press to start.
Result: is displayed on the LCD, the timer lamp lights
up, and blinks. and the day of the week disappear from
the LCD.
2 Press or to change the time setting.
3 Press again.
Result: and the set time are displayed on the LCD. The timer
lamp lights up.
INFORMATION
Each time or
advances by 10 minutes. Holding the button down will
change the setting rapidly.
Operation manual
10
page 5.
is pressed, the time setting
.
and ensure a
is pressed, the time setting
4 To stop operation, press
Result: and disappear from the LCD and the timer
lamp goes off. and the day of the week are displayed on the
LCD.
4.5.3

To combine OFF timer and ON timer

1 To set the timers, refer to
operation" on page 10 and
operation" on page 10.
Result: and are displayed on the LCD.
Example:
Display Current time
6:00
Note: If the timer setting is active, the current time is NOT displayed
on the LCD.
4.6

Weekly timer operation

With this operation, you can save up to 4 timer settings for each day
of the week.
Example: Create a different setting from Monday to Friday and a
different setting for weekends.
Day of the week Setting example
Monday
ON
25°C
▪ Make up to 4 settings.
6:00
Tuesday~Friday
ON
25°C
▪ Use the copy mode if the
6:00
settings are the same as
for Monday.
Saturday —
▪ No timer setting
Sunday
▪ Make up to 4 settings.
▪ ON-ON-ON-ON setting. Enables scheduling the operation mode
and set temperature.
▪ OFF-OFF-OFF-OFF setting. Only the turn off time can be set for
each day.
Note: Be sure to aim the user interface at the indoor unit and check
for a receiving tone when setting the Weekly timer operation. See
"2.2.3 To operate the user interface" on
INFORMATION
The clock MUST be set correctly before using any timer
functions. Refer to "3.3.1 To set the clock" on
.
"4.5.1 To start/stop OFF timer
"4.5.2 To start/stop ON timer
Set while... Operation
the unit is Stops at 7:00
operating. and starts at
14:00.
the unit is NOT Starts at 14:00.
operating.
1 2 3
OFF ON
27°C
8:30 17:30 22:00
1 2 3
OFF ON
27°C
8:30 17:30 22:00
1 2 3 4
ON OFF OFF ON
25°C 27°C
8:00 10:00 19:00 21:00
page 4.
page 5.
(C)(F)TXA15~50A2V1B(W)(S)(T)
Daikin room air conditioner
3P485919-7C – 2017.12
4
OFF
4
OFF
27°C