Description Of Changing Setpoints - sauter TRA 410 Operating Instructions Manual

Ecc room thermostat
Hide thumbs Also See for TRA 410:
Table of Contents

Advertisement

8.2

Description of changing setpoints

14/19
TRA 410 TRA 421 Display symbol
P
P
P
P
P
P
P
P
P
Description of operation
Procedure
Set the comfort temperature in the normal heat-
ing mode
Factory setting: 21 °C
Press to confirm the selection.
Turn to set the setpoint temperature that you want.
Press to confirm the entry.
Set the setback temperature in the heating ECO
mode
Factory setting: 19 °C
Press to confirm the selection.
Turn to set the setpoint temperature that you want.
Press to confirm the entry.
Set the comfort temperature in the normal cool-
ing mode
Factory setting: 21 °C
Press to confirm the selection.
Turn to set the setpoint temperature that you want.
Press to confirm the entry.
Set the setback temperature in the cooling ECO
mode
Factory setting: 23 °C
Press to confirm the selection.
Turn to set the setpoint temperature that you want.
Press to confirm the entry.
Set the min. floor temperature when a sensor is
connected and parameterised (parameter 040)
Factory setting: 3.0 = approx. 22 °C
Press to confirm the selection.
Turn to set to a value between 1 and 6.
1.0 = 18 °C and 6.0 = 28 °C
Press to confirm the entry.
Note: This setting option is only displayed if the
parameter for the floor sensor P040, for the com-
fort temperature, is activated. As soon as the floor
temperature has been reached, the internal sensor
takes over controlling the room.
Set the temperature for the absence function
Factory setting: 16 °C
Press to confirm the selection.
Turn to set the temperature that you want.
Press to confirm the entry.
Note: The temperature must be adjusted for sum-
mer mode.
Set the minimum and maximum temperature limit
Factory setting: Min. 5 °C and max. 30 °C
Press to confirm the selection.
Turn to set the minimum/maximum temperature.
Press to confirm the entry.
Set the time and the weekdays
Turn to set the hours, minutes and day. Press to
confirm the entry
In the case of a power failure, the time and weekday
settings are stored for approx. 10 hours
TRA 410, 421
P100015830 C

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tra 421

Table of Contents