sauter TRA 410 Operating Instructions Manual page 7

TRA 410, 421
Operation for the first time
(
(
(
P100015830 C
During the selection of the weekly switching programme
and the timeline flash.
6. appears in the display.
7. Select the weekly switching programme that you want by turning and pressing
the rotary knob:
flashes: weekly switching programme for Mon-Sun
flashes: weekly switching programme for Mon-Fri
flashes: weekly switching programme for Sat, Sun
flashes: weekly switching programme daily
8. appears in the display (switching command 1 for comfort mode).
Press and turn to select the switching commands P1...P4; define the
respective switch-on and switch-off points in 15-minute steps.
A maximum of 4 switching commands (P1...P4) can be defined for each day.
To delete a switching command, the switch-on and switch-off points must be set to
the same time.
9. You can leave the time programme by turning to
, the current day
and confirming.
7/19